GRIT AND GREASE SEPERATION SYSTEMS

GRIT AND GREASE SEPERATION SYSTEMS

Showing all 3 results

Grit and Grease Trap Bridges

Grit and Grease Trap Bridges are linear type bridge scrapers used in treatment plants to scrape the sludge that settles at the bottom of the preliminary settling tanks and sand trap tanks from the bottom and to remove the foam or oil layer accumulated on the surface from the pool.

In sand retaining bridges, sand can also be removed from the pool by using a sand pump.

Depending on the project, bridges can be produced from carbon steel, epoxy painted, galvanized or stainless materials. The parts in contact with water can be produced from stainless material.
Grit Seperator

SAND SEPARATORS

Sand Separators are equipment used in treatment plants to remove solid materials such as sand from water. It can be used to separate sand from the aqueous sand mixture coming from sand catcher bridges or to separate sand directly from wastewater.
Package Oil Seperator

Oil separation units are used to remove waste oils in wastewater.

Suspended oils and solids can be floated by introducing air through diffusers placed inside the tank. Floated by air oil trap systems are called DAF. Oil separation efficiency is higher than classical systems.

Microbubble generators are used as air sources in oil trap systems, where micron-sized air bubbles are introduced into the tank as the wastewater enters. Compared to classical DAF systems, very high efficiency can be achieved due to the ability to transfer smaller sized air bubbles to the wastewater more intensively.

Tank material can be preferred as carbon steel, epoxy painted or stainless steel. The parts in contact with the liquid in the scraper system can be made of specially produced plastic or stainless material.

TOP